| |
 |
| |
 |
| |
| Enter
the email id for newsletter subscription |
|
|
|
|
 |
To
maximize the production of high-speed cards without
compromising the desired quality is a challenging task
to the spinners.
Pre
opening of the fibre tufs is one of the vital operations
to achive better Carding performance, and this is primarly
carried out by the stationary flats above lickerin.
The rigid metallic clothing of the stationary tops and
its unique design has better capacity to break open
the fibre tufs and to facilitate revolving flat tops
for finer individualization and nep removal.
The stationary flats above lickerin incorporated in
high production cards can be further upgraded to improve
the production rate and quality. Lakshmi Card Clothing
introduces the new C-FACTOR CARDING SYSTEM that replaces
the original stationary flats above lickerin and maximizes
the benefits of high production cards.
C-FACTOR CARDING SYSTEM arrangement perfectly combines
the function of opening and cleaning in succession which
enhances the quality of sliver and reduces the strain
on the card clothing extending its life. |
C-FACTOR
SYSTEM -
8F+3K for C1/2, C1/2a & C1/3 Cards
 |
C-FACTOR
SYSTEM -
12F for C1/2, C1/2a & C1/3 Cards
 |
C-FACTOR
SYSTEM -
7F+1K for DK780 |
C-FACTOR
SYSTEM -
7F+1K for DK740 |
|
|
|
| |
| FEATURES
: |
| |
|
Integrated
rigid beam system |
|
Spring
loaded arrangement to avoid any damages to card
clothing |
|
Control
flat helps to vary the extraction of short fibers
and trash particles |
|
Smooth
finished aluminium extruded suction hood to avoid
any chocking of fibers |
|
Simple
and easy to fit |
|
Varied
population of wire points to suit process requirements |
|
Suitable
for lakshmi C1/2, C1/2a, C1/3, Textool TC 360
and Truetzschler / Trumac - DK 740, DK 760, DK
780 & DK 803 |
 |
Based
on the card and application,configuration of system
will be varied |
|
| |
| BENEFITS
: |
| |
|
Intensive
opening of fiber tufts before entering main carding
zone. |
|
Knive
and suction assist in elimination of trash and dirt
particles. |
|
Uniform
distribution of fibers on the cylinder surface enhances
carding efficiency |
|
Reduces
strain on flat tops and card clothing |
|
Minimises
dirt deposition in OE rotor, consequently increasing
the rotor life |
|
| |
| SYSTEM
CONFIGURATION : |
| |
| MAKE
& MODEL |
APPLICATION |
| COTTON |
SYNTHETIC |
| Lakshmi
- Rieter C1/2, C1/2a, C1/3 & Textool TC 360
|
8F
+ 3K |
12F |
| Truetzschler
/ Trumac DK 740, DK 760 DK 780 |
7F
+ 1K |
9F |
| Truetzschler
DK 803 |
5F
+ 1K |
6F |
| Rieter
C4, C10 |
10F
+ 1K |
- |
|
|
 |
|
|
|
|
